Skip to content

2019 DFSK Glory 580 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 DFSK Glory 580.

2019 DFSK Glory 580 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

DFSK Glory 580 Glory 580

2018 – 2020 2 trims

Glory 580 1.5T

148 hp · 1.5 L SFG15T I4 Petrol 1.5 L SFG15T I4 225/60 R17 3 fitments
GenerationGlory 580 2018–2020
MarketSoutheast Asia
Power148 hp
Engine1.5 L SFG15T I4 Petrol 1.5 L SFG15T I4, Petrol
Center bore67.1 mm
PCD5x110
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1717x7 ET40 5x11033TiresRims
Alt225/55 R1818x7.5 ET40 5x11033TiresRims
Alt235/50 R1919x7.5 ET40 5x11033TiresRims

Glory 580 1.8i

137 hp · 1.8 L SFG18 I4 Petrol 1.8 L SFG18 I4 225/60 R17 3 fitments
GenerationGlory 580 2018–2020
MarketSoutheast Asia
Power137 hp
Engine1.8 L SFG18 I4 Petrol 1.8 L SFG18 I4, Petrol
Center bore67.1 mm
PCD5x110
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1717x7 ET40 5x11033TiresRims
Alt225/55 R1818x7.5 ET40 5x11033TiresRims
Alt235/50 R1919x7.5 ET40 5x11033TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.