Skip to content

1997 Dodge Avenger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Dodge Avenger.

Fitment tables

2 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear.

Dodge Avenger FJ

1994 – 2000 USA market 2 trims

Avenger 2.0i

138 hp · I4 195/70 R14 92S 5 fitments
GenerationFJ 1994–2000
Power138 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R14 92S14x5.5 ET39 5x114.329TiresRims
195/65 R15 91T15x5.5 ET40 5x114.332TiresRims
205/60 R15 91T15x6 ET46 5x114.332TiresRims
215/60 R15 91T15x6.5 ET43 5x114.332TiresRims
225/50 R16 90H16x7 ET40 5x114.335TiresRims

Avenger 2.5i

153 hp · V6 205/55 R16 90H 5 fitments
GenerationFJ 1994–2000
Power153 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 90H16x6 ET46 5x114.335TiresRims
215/50 R17 90H17x7 ET40 5x114.335TiresRims
225/45 R17 89V17x7.5 ET38 5x114.338TiresRims
225/40 R18 89V18x7.5 ET38 5x114.338TiresRims
235/35 R19 87V19x8 ET35 5x114.341TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.