1991 Dodge Ram Van B350 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Dodge Ram Van B350.

1991 Dodge Ram Van B350 tire sizes

225/75R16 245/75R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1981 – 1994 3 trims

125 hp · 3.9 L V6 Petrol 3.9 L V6 225/75 R16 3 fitments

GenerationRam Van B350 1981–1994

MarketUSA

Power125 hp

Engine3.9 L V6 Petrol 3.9 L V6, Petrol

Center bore121.3 mm

PCD8x165.1

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	225/75 R16	16x6 ET25 ~~8x165.1~~	–	Tires Rims
Alt	245/75 R16	16x6.5 ET19 ~~8x165.1~~	–	Tires Rims
Alt	245/75 R16	16x7 ET12 ~~8x165.1~~	–	Tires Rims

150 hp · 5.2 L V8 Petrol 5.2 L V8 225/75 R16 3 fitments

GenerationRam Van B350 1981–1994

MarketUSA

Power150 hp

Engine5.2 L V8 Petrol 5.2 L V8, Petrol

Center bore121.3 mm

PCD8x165.1

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	225/75 R16	16x6 ET25 ~~8x165.1~~	–	Tires Rims
OE	245/75 R16	16x6.5 ET19 ~~8x165.1~~	–	Tires Rims
Alt	245/75 R16	16x7 ET12 ~~8x165.1~~	–	Tires Rims

180 hp · 5.9 L V8 Petrol 5.9 L V8 225/75 R16 3 fitments

GenerationRam Van B350 1981–1994

MarketUSA

Power180 hp

Engine5.9 L V8 Petrol 5.9 L V8, Petrol

Center bore121.3 mm

PCD8x165.1

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	225/75 R16	16x6 ET25 ~~8x165.1~~	–	Tires Rims
OE	245/75 R16	16x6.5 ET19 ~~8x165.1~~	–	Tires Rims
Alt	245/75 R16	16x7 ET12 ~~8x165.1~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.