1979 Dodge Challenger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1979 Dodge Challenger.

1979 Dodge Challenger tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1978 – 1983 USA market 2 trims

99 hp · I4 195/70 R14 88S 3 fitments

GenerationJT 1978–1983

Power99 hp

EngineI4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14 88S	14x5.5 ET44 ~~4x114.3~~	–	Tires Rims
195/65 R15 88H	15x6 ET38 ~~4x114.3~~	–	Tires Rims
205/55 R16 86V	16x6.5 ET35 ~~4x114.3~~	–	Tires Rims

137 hp · I4 195/70 R14 88S 3 fitments

GenerationJT 1978–1983

Power137 hp

EngineI4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14 88S	14x5.5 ET44 ~~4x114.3~~	–	Tires Rims
195/65 R15 88H	15x6 ET38 ~~4x114.3~~	–	Tires Rims
205/55 R16 86V	16x6.5 ET35 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.