2012 Dodge Charger SRT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Dodge Charger SRT.

2012 Dodge Charger SRT tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2014 USA market 1 trim

464 hp · 6.4L V8 275/40 ZR20 106Y 3 fitments

GenerationLD 2011–2014

Power464 hp

Engine6.4L V8, Petrol

Center bore71.6 mm

PCD5x115

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
275/40 ZR20 106Y	20x9.5 ET18.5 ~~5x115~~	36	Tires Rims
275/35 ZR21 105Y	21x9.5 ET18 ~~5x115~~	39	Tires Rims
285/30 ZR22 103Y	22x10 ET15 ~~5x115~~	39	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.