Skip to content

1977 Dodge Charger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1977 Dodge Charger.

1977 Dodge Charger tire sizes

Bolt pattern
Fitment tables

7 trims sold in 1977

Open a trim for its factory package and every alternative size, front and rear.

Dodge Charger IV

1975 – 1978 USA market 7 trims

Charger 3.7

100 hp · 3.7L I6 195/75 SR14 4 fitments
GenerationIV 1975–1978
Power100 hp
Engine3.7L I6, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET5 5x114.3–TiresRims
215/70 SR1414x5.5 ET5 5x114.3–TiresRims
225/70 SR1414x6 ET0 5x114.3–TiresRims
245/60 SR1515x7 ET0 5x114.3–TiresRims

Charger 5.2

140 hp · 5.2L V8 195/75 SR14 4 fitments
GenerationIV 1975–1978
Power140 hp
Engine5.2L V8, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET5 5x114.3–TiresRims
215/70 SR1414x5.5 ET5 5x114.3–TiresRims
225/70 SR1414x6 ET0 5x114.3–TiresRims
245/60 SR1515x7 ET0 5x114.3–TiresRims

Charger 5.2

150 hp · 5.2L V8 195/75 SR14 4 fitments
GenerationIV 1975–1978
Power150 hp
Engine5.2L V8, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET5 5x114.3–TiresRims
215/70 SR1414x5.5 ET5 5x114.3–TiresRims
225/70 SR1414x6 ET0 5x114.3–TiresRims
245/60 SR1515x7 ET0 5x114.3–TiresRims

Charger 5.9

190 hp · 5.9L V8 195/75 SR14 4 fitments
GenerationIV 1975–1978
Power190 hp
Engine5.9L V8, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET5 5x114.3–TiresRims
215/70 SR1414x5.5 ET5 5x114.3–TiresRims
225/70 SR1414x6 ET0 5x114.3–TiresRims
245/60 SR1515x7 ET0 5x114.3–TiresRims

Charger 5.9

175 hp · 5.9L V8 195/75 SR14 4 fitments
GenerationIV 1975–1978
Power175 hp
Engine5.9L V8, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET5 5x114.3–TiresRims
215/70 SR1414x5.5 ET5 5x114.3–TiresRims
225/70 SR1414x6 ET0 5x114.3–TiresRims
245/60 SR1515x7 ET0 5x114.3–TiresRims

Charger 6.5

240 hp · 6.5L V8 195/75 SR14 4 fitments
GenerationIV 1975–1978
Power240 hp
Engine6.5L V8, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET5 5x114.3–TiresRims
215/70 SR1414x5.5 ET5 5x114.3–TiresRims
225/70 SR1414x6 ET0 5x114.3–TiresRims
245/60 SR1515x7 ET0 5x114.3–TiresRims

Charger 6.5

185 hp · 6.5L V8 195/75 SR14 4 fitments
GenerationIV 1975–1978
Power185 hp
Engine6.5L V8, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET5 5x114.3–TiresRims
215/70 SR1414x5.5 ET5 5x114.3–TiresRims
225/70 SR1414x6 ET0 5x114.3–TiresRims
245/60 SR1515x7 ET0 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.