Skip to content
tirewheelguide.com

2005 Dodge Charger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Dodge Charger.

2005 Dodge Charger tire sizes

235/55R18215/65R17235/60R17255/50R18235/50R19255/45R19245/45R20255/40R21265/35R22
Bolt pattern
Other years
19841985198619872005200620072008 All 1966–2026
Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Dodge Charger VI

2005 – 2010 USA market 3 trims

Charger 2.7i

177 hp · V6 215/65 R17 98T 4 fitments
GenerationVI 2005–2010
Power177 hp
EngineV6, Petrol
Center bore71.6 mm
PCD5x115
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R17 98T17x7 ET22 5x11530TiresRims
235/60 R17 98T17x7.5 ET24 5x11530TiresRims
235/55 R18 98H18x7.5 ET24 5x11533TiresRims
235/50 R19 97H19x7.5 ET24 5x11533TiresRims

Charger 3.5i

247 hp · 3.5L V6 215/65 R17 98T 4 fitments
GenerationVI 2005–2010
Power247 hp
Engine3.5L V6, Petrol
Center bore71.6 mm
PCD5x115
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R17 98T17x7 ET22 5x11530TiresRims
235/55 R18 98H18x7.5 ET24 5x11533TiresRims
255/50 R18 98H18x8 ET24 5x11533TiresRims
255/45 R19 98V19x8.5 ET25 5x11536TiresRims

Charger 5.7i

355 hp · 5.7L V8 235/55 R18 98H 4 fitments
GenerationVI 2005–2010
Power355 hp
Engine5.7L V8, Petrol
Center bore71.6 mm
PCD5x115
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R18 98H18x7.5 ET24 5x11533TiresRims
245/45 R20 99V20x8 ET24 5x11536TiresRims
255/40 R21 99V21x8.5 ET25 5x11536TiresRims
265/35 ZR22 97W22x9 ET20 5x11539TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading