1989 Dodge Colt tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 Dodge Colt.

1989 Dodge Colt tire sizes

185/60R14 175/70R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1992 3 trims

81 hp · 4G15 I4 155x SR13 3 fitments

GenerationVI 1989–1992

Power81 hp

Engine4G15 I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET46 ~~4x100~~	26	Tires Rims
175/70 R13 82S	13x5 ET46 ~~4x100~~	29	Tires Rims
185/60 R14 82S	14x5.5 ET46 ~~4x100~~	29	Tires Rims

135 hp · 4G61T I4 185/60 R14 82S 1 fitment

GenerationVI 1989–1992

Power135 hp

Engine4G61T I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R14 82S	14x5.5 ET46 ~~4x100~~	29	Tires Rims

113 hp · 4G61 I4 155x SR13 3 fitments

GenerationVI 1989–1992

Power113 hp

Engine4G61 I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET46 ~~4x100~~	26	Tires Rims
175/70 R13 82S	13x5 ET46 ~~4x100~~	29	Tires Rims
185/60 R14 82S	14x5.5 ET46 ~~4x100~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.