1967 Dodge D150 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1967 Dodge D150.

1967 Dodge D150 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1966 – 1971 USA market 1 trim

N/A · V8 205/75 R15 98Q 5 fitments

GenerationAD II 1966–1971

PowerN/A

EngineV8, Petrol

Center bore71.6 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 R15 98Q	15x6 ET20 ~~5x114.3~~	26	Tires Rims
235/70 R15 98Q	15x6.5 ET20 ~~5x114.3~~	26	Tires Rims
225/65 R16 97S	16x6.5 ET20 ~~5x114.3~~	29	Tires Rims
235/65 R16 97S	16x6.5 ET20 ~~5x114.3~~	29	Tires Rims
235/60 R17 97S	17x7 ET15 ~~5x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.