Skip to content

1987 Dodge Dakota tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Dodge Dakota.

Fitment tables

2 trims sold in 1987

Open a trim for its factory package and every alternative size, front and rear.

Dodge Dakota DN I

1987 – 1996 USA market 2 trims

Dakota 2.2i

95 hp · I4 195x R14 94S 6 fitments
GenerationDN I 1987–1996
Power95 hp
EngineI4, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195x R14 94S14x6 ET37 5x114.329TiresRims
195/75 R15 94S15x6 ET37 5x114.332TiresRims
205/75 R15 96S15x6 ET37 5x114.332TiresRims
215/75 R15 96S15x6 ET37 5x114.332TiresRims
225/75 R15 97S15x6.5 ET35 5x114.335TiresRims
235/70 R16 96T16x7 ET35 5x114.335TiresRims

Dakota 3.9i

123 hp · V6 195/75 R15 94S 6 fitments
GenerationDN I 1987–1996
Power123 hp
EngineV6, Petrol
Center bore71.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 R15 94S15x6 ET37 5x114.332TiresRims
205/75 R15 96S15x6 ET37 5x114.332TiresRims
215/75 R15 96S15x6 ET37 5x114.332TiresRims
235/75 R15 98S15x7 ET38.1 5x114.335TiresRims
255/70 R15 98T15x7.5 ET30 5x114.335TiresRims
255/65 R16 96T16x7.5 ET30 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.