Skip to content

2001 Dodge Dakota tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Dodge Dakota.

Fitment tables

3 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear.

Dodge Dakota DN II

1997 – 2004 USA market 3 trims

Dakota 2.5i

118 hp · I4 215/75 R15 99S 7 fitments
GenerationDN II 1997–2004
Power118 hp
EngineI4, Petrol
Center bore71.6 mm
PCD6x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 R15 99S15x6 ET37 6x114.332TiresRims
235/75 R15 101S15x7 ET38.1 6x114.335TiresRims
235/70 R16 101S16x7 ET35 6x114.335TiresRims
235/65 R17 99T17x7 ET35 6x114.336TiresRims
235/60 R18 98T18x7 ET35 6x114.336TiresRims
235/55 R19 97H19x7.5 ET30 6x114.338TiresRims
255/45 R20 99V20x8 ET25 6x114.341TiresRims

Dakota 3.9i

173 hp · V6 235/75 R15 101S 7 fitments
GenerationDN II 1997–2004
Power173 hp
EngineV6, Petrol
Center bore71.6 mm
PCD6x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R15 101S15x7 ET38.1 6x114.335TiresRims
255/70 R15 101T15x8 ET25.4 6x114.335TiresRims
255/65 R16 101T16x8 ET25 6x114.338TiresRims
255/60 R17 100T17x8 ET25 6x114.338TiresRims
255/55 R18 99H18x8 ET25 6x114.339TiresRims
255/50 R19 99H19x8.5 ET15 6x114.339TiresRims
265/45 R20 99V20x9 ET10 6x114.342TiresRims

Dakota 5.9i

247 hp · V8 255/65 R16 101T 7 fitments
GenerationDN II 1997–2004
Power247 hp
EngineV8, Petrol
Center bore71.6 mm
PCD6x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
255/65 R16 101T16x8 ET25.4 6x114.338TiresRims
255/55 R17 103H17x9 ET25.4 6x114.341TiresRims
275/60 R16 101T16x8.5 ET20 6x114.338TiresRims
275/55 R17 101H17x8.5 ET15 6x114.341TiresRims
275/50 R19 100H19x8.5 ET15 6x114.341TiresRims
275/45 R19 99V19x9 ET10 6x114.342TiresRims
285/40 R20 101V20x10 ET0 6x114.344TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.