Skip to content

1970 Dodge Dart tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1970 Dodge Dart.

1970 Dodge Dart tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1970

Open a trim for its factory package and every alternative size, front and rear.

Dodge Dart IV Facelift

1970 – 1976 4 trims

Dart 198

125 hp · 3.2 L I6 Petrol 3.2 L I6 185/75 SR14 4 fitments
GenerationIV Facelift 1970–1976
MarketUSA
Power125 hp
Engine3.2 L I6 Petrol 3.2 L I6, Petrol
Center bore59.2 mm
PCD5x101.6
Tire sizeRim size and bolt patternPressure, psiPrices
185/75 SR1414x4.5 ET31 5x101.6–TiresRims
205/70 SR1414x5.5 ET19 5x101.6–TiresRims
205/65 SR1515x5.5 ET19 5x101.6–TiresRims
205/65 SR1515x6 ET12 5x101.6–TiresRims

Dart 225

145 hp · 3.7 L I6 Petrol 3.7 L I6 185/75 SR14 4 fitments
GenerationIV Facelift 1970–1976
MarketUSA
Power145 hp
Engine3.7 L I6 Petrol 3.7 L I6, Petrol
Center bore59.2 mm
PCD5x101.6
Tire sizeRim size and bolt patternPressure, psiPrices
185/75 SR1414x4.5 ET31 5x101.6–TiresRims
205/70 SR1414x5.5 ET19 5x101.6–TiresRims
205/65 SR1515x5.5 ET19 5x101.6–TiresRims
205/65 SR1515x6 ET12 5x101.6–TiresRims

Dart 318

230 hp · 5.2 L V8 Petrol 5.2 L V8 185/75 SR14 4 fitments
GenerationIV Facelift 1970–1976
MarketUSA
Power230 hp
Engine5.2 L V8 Petrol 5.2 L V8, Petrol
Center bore59.2 mm
PCD5x101.6
Tire sizeRim size and bolt patternPressure, psiPrices
185/75 SR1414x4.5 ET31 5x101.6–TiresRims
205/70 SR1414x5.5 ET19 5x101.6–TiresRims
205/65 SR1515x5.5 ET19 5x101.6–TiresRims
205/65 SR1515x6 ET12 5x101.6–TiresRims

Dart 340

275 hp · 5.6 L V8 Petrol 5.6 L V8 205/70 SR14 4 fitments
GenerationIV Facelift 1970–1976
MarketUSA
Power275 hp
Engine5.6 L V8 Petrol 5.6 L V8, Petrol
Center bore59.2 mm
PCD5x101.6
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 SR1414x5.5 ET19 5x101.6–TiresRims
205/65 SR1515x5.5 ET19 5x101.6–TiresRims
205/65 SR1515x6 ET12 5x101.6–TiresRims
215/65 SR1515x6 ET12 5x101.6–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.