1996 Dodge Neon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Dodge Neon.

1996 Dodge Neon tire sizes

Bolt patterns

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 1999 USA market 2 trims

148 hp · 2.0L ECC I4 175/65 HR14 5 fitments

GenerationI 1994–1999

Power148 hp

Engine2.0L ECC I4, Petrol

Center bore57.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 HR14	14x5.5 ET40 ~~5x100~~	32	Tires Rims
185/65 HR14	14x5.5 ET40 ~~5x100~~	32	Tires Rims
185/65 HR14	14x6 ET40 ~~5x100~~	32	Tires Rims
185/60 HR15	15x6 ET40 ~~5x100~~	32	Tires Rims
205/50 VR16	16x6 ET40 ~~5x100~~	35	Tires Rims

132 hp · 2.0L A588 I4 165/80 SR13 5 fitments

GenerationI 1994–1999

Power132 hp

Engine2.0L A588 I4, Petrol

Center bore57.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/80 SR13	13x5 ET40 ~~4x100~~	29	Tires Rims
185/70 SR13	13x5 ET40 ~~4x100~~	29	Tires Rims
175/65 HR14	14x5.5 ET40 ~~4x100~~	32	Tires Rims
185/65 HR14	14x5.5 ET40 ~~4x100~~	32	Tires Rims
185/60 HR15	15x6 ET40 ~~4x100~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.