Skip to content

1996 Dodge Ram 1500 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Dodge Ram 1500.

Fitment tables

2 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

Dodge Ram 1500 II (BR/BE)

1994 – 2001 USA market 2 trims

Ram 1500 3.9

235 hp · 3.9L V6 225/75 R16 110S 8 fitments
GenerationII (BR/BE) 1994–2001
Power235 hp
Engine3.9L V6, Petrol
Center bore77.8 mm
PCD5x139.7
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R16 110S16x6.5 ET31 5x139.73.4TiresRims
245/75 R16 112S16x7 ET31 5x139.73.4TiresRims
245/70 R17 111T17x7 ET25.4 5x139.73.6TiresRims
265/60 R18 110T18x8 ET25 5x139.73.6TiresRims
265/55 R19 110T19x8 ET20 5x139.73.8TiresRims
275/50 R19 108H19x8.5 ET20 5x139.73.8TiresRims
285/50 R20 108H20x9 ET10 5x139.73.8TiresRims
305/45 R20 106V20x10 ET0 5x139.74TiresRims

Ram 1500 5.2

308 hp · 5.2L V8 225/75 R16 110S 8 fitments
GenerationII (BR/BE) 1994–2001
Power308 hp
Engine5.2L V8, Petrol
Center bore77.8 mm
PCD5x139.7
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R16 110S16x6.5 ET31 5x139.73.4TiresRims
245/75 R16 112S16x7 ET31 5x139.73.4TiresRims
245/70 R17 111T17x7 ET25.4 5x139.73.6TiresRims
265/60 R18 110T18x8 ET25 5x139.73.6TiresRims
265/55 R19 110T19x8 ET20 5x139.73.8TiresRims
275/50 R19 108H19x8.5 ET20 5x139.73.8TiresRims
285/50 R20 108H20x9 ET10 5x139.73.8TiresRims
305/45 R20 106V20x10 ET0 5x139.74TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.