Skip to content

2005 Dodge Ram 1500 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Dodge Ram 1500.

2005 Dodge Ram 1500 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Dodge Ram 1500 III (DR/DH)

2002 – 2008 USA market 3 trims

Ram 1500 3.7i

215 hp · 3.7L V6 245/70 R17 110T 5 fitments
GenerationIII (DR/DH) 2002–2008
Power215 hp
Engine3.7L V6, Petrol
Center bore77.8 mm
PCD5x139.7
Thread9/16" - 18 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R17 110T17x7 ET25.4 5x139.73.4TiresRims
265/70 R17 115T17x8 ET25.4 5x139.73.4TiresRims
275/60 R20 115T20x8 ET19.5 5x139.73.6TiresRims
275/60 R20 115T20x9 ET19.05 5x139.73.6TiresRims
285/45 R22 114H22x9 ET19.05 5x139.74TiresRims

Ram 1500 4.7i

237 hp · 4.7L V8 245/70 R17 110T 5 fitments
GenerationIII (DR/DH) 2002–2008
Power237 hp
Engine4.7L V8, Petrol
Center bore77.8 mm
PCD5x139.7
Thread9/16" - 18 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R17 110T17x7 ET25.4 5x139.73.4TiresRims
265/70 R17 115T17x8 ET25.4 5x139.73.4TiresRims
275/60 R20 115T20x8 ET19.5 5x139.73.6TiresRims
275/60 R20 115T20x9 ET19.05 5x139.73.6TiresRims
285/45 R22 114H22x9 ET19.05 5x139.74TiresRims

Ram 1500 5.7i

346 hp · 5.7L V8 245/70 R17 110T 5 fitments
GenerationIII (DR/DH) 2002–2008
Power346 hp
Engine5.7L V8, Petrol
Center bore77.8 mm
PCD5x139.7
Thread9/16" - 18 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R17 110T17x7 ET25.4 5x139.73.4TiresRims
265/70 R17 115T17x8 ET25.4 5x139.73.4TiresRims
275/60 R20 115T20x8 ET19.5 5x139.73.6TiresRims
275/60 R20 115T20x9 ET19.05 5x139.73.6TiresRims
285/45 R22 114H22x9 ET19.05 5x139.74TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.