Skip to content

2009 Dodge Ram 2500 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Dodge Ram 2500.

Bolt pattern
Fitment tables

2 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Dodge Ram 2500 DS/DJ

2009 – 2010 USA market 2 trims

Ram 2500 5.7i

383 hp · V8 245/70 R17 116S 5 fitments
GenerationDS/DJ 2009–2010
Power383 hp
EngineV8, Petrol
Center bore121.3 mm
PCD8x165.1
Thread9/16" - 18 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R17 116S17x7.5 ET57 8x165.14.8TiresRims
265/70 R17 118S17x8 ET42 8x165.14.8TiresRims
275/70 R18 118T18x8 ET43 8x165.14.9TiresRims
255/65 R19 116T19x7.5 ET50 8x165.15TiresRims
285/60 R20 115T20x8 ET50 8x165.15TiresRims

Ram 2500 6.7TD

350 hp · I6 265/70 R17 118S 4 fitments
GenerationDS/DJ 2009–2010
Power350 hp
EngineI6, Diesel
Center bore121.3 mm
PCD8x165.1
Thread9/16" - 18 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R17 118S17x8 ET42 8x165.14.8TiresRims
275/70 R18 118T18x8 ET43 8x165.14.9TiresRims
285/60 R20 115T20x8 ET55 8x165.15TiresRims
305/55 R20 115H20x9 ET45 8x165.15TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.