Skip to content

1994 Dodge Ram 3500 Van tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Dodge Ram 3500 Van.

1994 Dodge Ram 3500 Van tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear.

Dodge Ram 3500 Van BR/BE

1994 – 2003 USA market 3 trims

Ram 3500 Van 3.9

174 hp · V6 225/75 R16 4 fitments
GenerationBR/BE 1994–2003
Power174 hp
EngineV6, Petrol
Center bore121.3 mm
PCD8x165.1
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R1616x6.5 ET20 8x165.15.5TiresRims
245/75 R1616x6.5 ET20 8x165.15.5TiresRims
225/75 R16 105S16x7 ET0 8x165.13.9TiresRims
225/70 R17 104S17x8 ET0 8x165.152TiresRims

Ram 3500 Van 5.2

228 hp · V8 225/75 R16 4 fitments
GenerationBR/BE 1994–2003
Power228 hp
EngineV8, Petrol
Center bore121.3 mm
PCD8x165.1
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R1616x6.5 ET20 8x165.15.5TiresRims
245/75 R1616x6.5 ET20 8x165.15.5TiresRims
225/75 R16 105S16x7 ET0 8x165.13.9TiresRims
225/70 R17 104S17x8 ET0 8x165.152TiresRims

Ram 3500 Van 5.9

255 hp · V8 225/75 R16 4 fitments
GenerationBR/BE 1994–2003
Power255 hp
EngineV8, Petrol
Center bore121.3 mm
PCD8x165.1
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R1616x6.5 ET20 8x165.15.5TiresRims
245/75 R1616x6.5 ET20 8x165.15.5TiresRims
225/75 R16 105S16x7 ET0 8x165.13.9TiresRims
225/70 R17 104S17x8 ET0 8x165.152TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.