1997 Dodge Viper tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Dodge Viper.

1997 Dodge Viper tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1996 – 2002 USA market 2 trims

414 hp · V10 275/40 ZR17 98Z / 335/35 ZR17 106Z 2 fitments

GenerationSR2 1996–2002

Power414 hp

EngineV10, Petrol

Center bore71.6 mm

PCD6x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front275/40 ZR17 98Z	17x10 ET51 ~~6x114.3~~	35	Tires Rims
Rear335/35 ZR17 106Z	17x13 ET71 ~~6x114.3~~	35	Tires Rims
Front275/35 ZR18 96Z	18x10 ET51 ~~6x114.3~~	35	Tires Rims
Rear335/30 ZR18 105Z	18x13 ET71 ~~6x114.3~~	35	Tires Rims

451 hp · V10 275/40 ZR17 98Z / 335/35 ZR17 106Z 2 fitments

GenerationSR2 1996–2002

Power451 hp

EngineV10, Petrol

Center bore71.6 mm

PCD6x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front275/40 ZR17 98Z	17x10 ET51 ~~6x114.3~~	35	Tires Rims
Rear335/35 ZR17 106Z	17x13 ET71 ~~6x114.3~~	35	Tires Rims
Front275/35 ZR18 96Z	18x10 ET51 ~~6x114.3~~	35	Tires Rims
Rear335/30 ZR18 105Z	18x13 ET71 ~~6x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.