2010 Dodge Viper tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Dodge Viper.

2010 Dodge Viper tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2010 USA market 1 trim

603 hp · V10 275/35 ZR18 87Z / 345/30 ZR19 98Z 2 fitments

GenerationZB2 2008–2010

Power603 hp

EngineV10, Petrol

Center bore71.6 mm

PCD6x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front275/35 ZR18 87Z	18x10 ET50.8 ~~6x114.3~~	29	Tires Rims
Rear345/30 ZR19 98Z	19x13 ET71.1 ~~6x114.3~~	29	Tires Rims
Front285/30 ZR19 85Z	19x10 ET50 ~~6x114.3~~	29	Tires Rims
Rear345/25 ZR20 98Z	20x13 ET70 ~~6x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.