Skip to content

2026 Dongfeng Ace (Yipai) 008 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Dongfeng Ace (Yipai) 008.

2026 Dongfeng Ace (Yipai) 008 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Dongfeng Ace (Yipai) 008 Ace (Yipai) 008

2024 – 2027 2 trims

Ace (Yipai) 008 1.5 T

268 hp · 1.5 L DFMC15TE3 I4 Petrol 1.5 L DFMC15TE3 I4 255/50 R20 / 255/50 R20 2 fitments
GenerationAce (Yipai) 008 2024–2027
MarketChina
Power268 hp
Engine1.5 L DFMC15TE3 I4 Petrol 1.5 L DFMC15TE3 I4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront255/50 R2020x 5x10836TiresRims
Rear255/50 R20 5x10836Tires
OE265/45 R2121x9 ET38 5x10836TiresRims

Ace (Yipai) 008 BEV

268 hp · Electric 255/50 R20 / 255/50 R20 2 fitments
GenerationAce (Yipai) 008 2024–2027
MarketChina
Power268 hp
EngineElectric, Electric
Center bore65.1 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront255/50 R2020x 5x10836TiresRims
Rear255/50 R20 5x10836Tires
OE265/45 R2121x9 ET38 5x10836TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.