2011 Dongfeng K01 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Dongfeng K01.

2011 Dongfeng K01 tire sizes

165/70R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2017 3 trims

44 hp · I4 165/70 R14 1 fitment

GenerationK01 2011–2017

Power44 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x100

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R14	14x5.5 ET35 ~~4x100~~	–	Tires Rims

63 hp · I4 165/70 R14 1 fitment

GenerationK01 2011–2017

Power63 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x100

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R14	14x5.5 ET35 ~~4x100~~	–	Tires Rims

87 hp · I4 165/70 R14 1 fitment

GenerationK01 2011–2017

Power87 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x100

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R14	14x5.5 ET35 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.