2013 Dongfeng S30 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Dongfeng S30.

2013 Dongfeng S30 tire sizes

195/60R15

Bolt pattern

4x108

2 generations were sold in 2013. Check your chassis code before ordering wheels.

Other years

2009 2010 2011 2012 2013 2014 2015 2016 All 2009–2017

Fitment tables

4 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Dongfeng S30 Facelift

2013 – 2017 3 trims

S30 1.5i

114 hp · I4 195/60 R15 1 fitment

GenerationFacelift 2013–2017

Power114 hp

EngineI4, Petrol

Center bore65.1 mm

PCD4x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15	15x6 ET29 ~~4x108~~	2	Tires Rims

S30 1.6 CNG

90 hp · I4 Natural 195/60 R15 1 fitment

GenerationFacelift 2013–2017

Power90 hp

EngineI4 Natural, Gas

Center bore65.1 mm

PCD4x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15	15x6 ET29 ~~4x108~~	2	Tires Rims

S30 1.6i

105 hp · 1.6L TU5JP4 I4 195/60 R15 1 fitment

GenerationFacelift 2013–2017

Power105 hp

Engine1.6L TU5JP4 I4, Petrol

Center bore65.1 mm

PCD4x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15	15x6 ET29 ~~4x108~~	2	Tires Rims

Dongfeng S30 S30

2009 – 2013 1 trim

S30 1.6i

105 hp · TU5JP4 I4 195/60 R15 1 fitment

GenerationS30 2009–2013

Power105 hp

EngineTU5JP4 I4, Petrol

Center bore65.1 mm

PCD4x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15	15x6 ET29 ~~4x108~~	2	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.