Skip to content

2025 DR 6.0 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 DR 6.0.

2025 DR 6.0 tire sizes

Bolt pattern

2 generations were sold in 2025. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

DR 6.0 Facelift

2024 – 2025 2 trims

6.0 1.5 PHEV

312 hp · 1.5 L I4 Hybrid 1.5 L I4 225/55 R19 / 225/55 R19 2 fitments
GenerationFacelift 2024–2025
MarketEurope
Power312 hp
Engine1.5 L I4 Hybrid 1.5 L I4, Hybrid
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront225/55 R1919x 5x108TiresRims
Rear225/55 R19 5x108Tires
AltFront245/45 R2020x 5x108TiresRims
Rear245/45 R20 5x108Tires

6.0 1.6 T-GDI

176 hp · 1.6 L I4 Petrol + LPG 1.6 L I4 Petrol + 225/55 R19 / 225/55 R19 2 fitments
GenerationFacelift 2024–2025
MarketEurope
Power176 hp
Engine1.6 L I4 Petrol + LPG 1.6 L I4 Petrol +, Lpg
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront225/55 R1919x 5x108TiresRims
Rear225/55 R19 5x108Tires
AltFront245/45 R2020x 5x108TiresRims
Rear245/45 R20 5x108Tires

DR 6.0 6.0

2022 – 2025 1 trim

6.0 1.5 Turbo

153 hp · 1.5 L I4 Petrol 1.5 L I4 225/55 R19 2 fitments
Generation6.0 2022–2025
MarketEurope
Power153 hp
Engine1.5 L I4 Petrol 1.5 L I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1919x7 ET33 5x10832TiresRims
AltFront245/45 R2020x 5x108TiresRims
Rear245/45 R20 5x108Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.