Skip to content

2008 FAW Audi A6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 FAW Audi A6.

2008 FAW Audi A6 tire sizes

Bolt pattern
Fitment tables

6 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

FAW Audi A6 III

2005 – 2011 6 trims

A6 2.0T

168 hp · I4 225/55 R16 1 fitment
GenerationIII 2005–2011
Power168 hp
EngineI4, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R1616x7.5 ET45 5x112–TiresRims

A6 2.4

174 hp · V6 225/50 R17 1 fitment
GenerationIII 2005–2011
Power174 hp
EngineV6, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R1717x7.5 ET40 5x112–TiresRims

A6 2.8

217 hp · V6 225/50 R17 1 fitment
GenerationIII 2005–2011
Power217 hp
EngineV6, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R1717x7.5 ET40 5x112–TiresRims

A6 3.0T

306 hp · V6 245/45 R17 2 fitments
GenerationIII 2005–2011
Power306 hp
EngineV6, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 R1717x7.5 ET40 5x112–TiresRims
225/50 R1717x7.5 ET40 5x112–TiresRims

A6 3.2

252 hp · V6 225/50 R17 1 fitment
GenerationIII 2005–2011
Power252 hp
EngineV6, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R1717x7.5 ET40 5x112–TiresRims

A6 4.2

330 hp · V8 245/45 R17 1 fitment
GenerationIII 2005–2011
Power330 hp
EngineV8, Petrol
Center bore66.5 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/45 R1717x7.5 ET40 5x112–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.