Skip to content

2017 FAW Toyota Land Cruiser Prado tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 FAW Toyota Land Cruiser Prado.

2017 FAW Toyota Land Cruiser Prado tire sizes

Bolt pattern

2 generations were sold in 2017. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2017

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

FAW Toyota Land Cruiser Prado 150 Series Facelift II

2017 – 2023 China market 1 trim

Land Cruiser Prado 3.5 DualVVT-i

276 hp · 7GR-FKS V6 265/60 R18 1 fitment
Generation150 Series Facelift II 2017–2023
Power276 hp
Engine7GR-FKS V6, Petrol
Center bore106.2 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/60 R1818x7.5 ET25 6x139.7–TiresRims

FAW Toyota Land Cruiser Prado 150 Series Facelift

2014 – 2017 2 trims

Land Cruiser Prado 2.7 VVT-i

157 hp · I4 265/65 R17 1 fitment
Generation150 Series Facelift 2014–2017
Power157 hp
EngineI4, Petrol
Center bore106.2 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R1717x7.5 ET15 6x139.7–TiresRims

Land Cruiser Prado 3.5 VVT-i

276 hp · V6 265/65 R17 110H 5 fitments
Generation150 Series Facelift 2014–2017
Power276 hp
EngineV6, Petrol
Center bore106.2 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R17 110H17x7.5 ET25 6x139.732TiresRims
265/60 R18 109H18x7.5 ET25 6x139.735TiresRims
245/70 R17 110H17x6.5 ET15 6x139.735TiresRims
285/60 R18 116V18x7.5 ET25 6x139.735TiresRims
285/50 R20 112V20x8.5 ET25 6x139.735TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.