2013 FAW Besturn B50 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 FAW Besturn B50.

2013 FAW Besturn B50 tire sizes

195/65R15 205/55R16 215/50R17

Bolt pattern

5x114.3

2 generations were sold in 2013. Check your chassis code before ordering wheels.

Other years

2009 2010 2011 2012 2013 2014 2015 2016 All 2009–2020

Fitment tables

3 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

FAW Besturn B50 I Facelift

2013 – 2016 2 trims

Besturn B50 1.6i

102 hp · 1.6L BWH I4 195/65 R15 1 fitment

GenerationI Facelift 2013–2016

Power102 hp

Engine1.6L BWH I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15	15x6 ET50 ~~5x114.3~~	32	Tires Rims

Besturn B50 1.8i

137 hp · 1.8L I4 205/55 R16 2 fitments

GenerationI Facelift 2013–2016

Power137 hp

Engine1.8L I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R16	16x7 ET55 ~~5x114.3~~	–	Tires Rims
215/50 R17	17x7 ET60 ~~5x114.3~~	–	Tires Rims

FAW Besturn B50 I

2009 – 2013 1 trim

Besturn B50 1.6i

102 hp · 1.6L BWH I4 195/65 R15 1 fitment

GenerationI 2009–2013

Power102 hp

Engine1.6L BWH I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15	15x6 ET50 ~~5x114.3~~	32	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.