Skip to content

2023 FAW Besturn B70 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 FAW Besturn B70.

2023 FAW Besturn B70 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

FAW Besturn B70 III

2020 – 2025 2 trims

Besturn B70 1.5T (Liftback, 5d)

166 hp · 1.5 L CA4GB15TD I4 Petrol 1.5 L CA4GB15TD I4 225/50 R18 3 fitments
GenerationIII 2020–2025
MarketChina
Power166 hp
Engine1.5 L CA4GB15TD I4 Petrol 1.5 L CA4GB15TD I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/50 R1818x7 ET35 5x114.332 F / 29 RTiresRims
OE225/45 R1919x7.5 ET35 5x114.333TiresRims
Alt225/55 R1717x7 ET35 5x114.332 F / 29 RTiresRims

Besturn B70 2.0T (Liftback, 5d)

214 hp · 2.0 L GA4GC20TD I4 Petrol 2.0 L GA4GC20TD I4 225/50 R18 3 fitments
GenerationIII 2020–2025
Power214 hp
Engine2.0 L GA4GC20TD I4 Petrol 2.0 L GA4GC20TD I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/50 R1818x7 ET35 5x114.332 F / 29 RTiresRims
OE225/45 R1919x7.5 ET35 5x114.333TiresRims
Alt225/40 ZR2020x7.5 ET35 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.