2011 FAW T50 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 FAW T50.

2011 FAW T50 tire sizes

165/70R13

Bolt pattern

Other years

2011 All 2011–2011

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2011 2 trims

59 hp · I4 165/70 R13 1 fitment

GenerationT50 2011–2011

Power59 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R13	13x5 ET45 ~~4x100~~	–	Tires Rims

52 hp · I4 165/70 R13 1 fitment

GenerationT50 2011–2011

Power52 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R13	13x5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.