1995 Ferrari 348 Spider tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Ferrari 348 Spider.

1995 Ferrari 348 Spider tire sizes

215/50R17 255/45R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1993 – 1995 2 trims

310 hp · 3.4L F119G V8 215/50 R17 91W / 255/45 R17 98W 1 fitment

Generation348 Spider 1993–1995

MarketUSA

Power310 hp

Engine3.4L F119G V8, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front215/50 R17 91W	17x7.5 ET49 ~~5x108~~	38	Tires Rims
Rear255/45 R17 98W	17x9 ET60 ~~5x108~~	38	Tires Rims

315 hp · 3.4L F119H V8 215/50 ZR17 91W / 255/45 ZR17 98W 1 fitment

Generation348 Spider 1993–1995

MarketEurope

Power315 hp

Engine3.4L F119H V8, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front215/50 ZR17 91W	17x7.5 ET49 ~~5x108~~	38	Tires Rims
Rear255/45 ZR17 98W	17x9 ET60 ~~5x108~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.