2013 Ferrari 458 Italia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Ferrari 458 Italia.

2013 Ferrari 458 Italia tire sizes

235/35R20 245/35R20 295/35R20 305/30R20

Bolt pattern

Other years

2009 2010 2011 2012 2013 2014 2015 All 2009–2015

Fitment tables

2 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Ferrari 458 Italia 458 Italia

2009 – 2015 2 trims

458 Italia 4.5

562 hp · 4.5L V8 235/35 ZR20 92Y / 295/35 ZR20 101Y 3 fitments

Generation458 Italia 2009–2015

MarketEurope

Power562 hp

Engine4.5L V8, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/35 ZR20 92Y	20x8.5 ET46 ~~5x114.3~~	30	Tires Rims
Rear295/35 ZR20 101Y	20x10.5 ET58 ~~5x114.3~~	29	Tires Rims
Front235/35 ZR20 92W	20x8.5 ET46 ~~5x114.3~~	30	Tires Rims
Rear295/35 ZR20 104W	20x10.5 ET58 ~~5x114.3~~	29	Tires Rims
Front245/35 ZR20 91Y	20x9 ET46 ~~5x114.3~~	30	Tires Rims
Rear305/30 ZR20 103Y	20x11 ET58 ~~5x114.3~~	29	Tires Rims

458 Italia 4.5 (ABA-F142)

562 hp · 4.5L V8 235/35 ZR20 92Y / 295/35 ZR20 101Y 3 fitments

Generation458 Italia 2009–2015

MarketJapan

Power562 hp

Engine4.5L V8, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/35 ZR20 92Y	20x8.5 ET46 ~~5x114.3~~	30	Tires Rims
Rear295/35 ZR20 101Y	20x10.5 ET58 ~~5x114.3~~	29	Tires Rims
Front235/35 R20 92W	20x8.5 ET46 ~~5x114.3~~	30	Tires Rims
Rear295/35 R20 104W	20x10.5 ET58 ~~5x114.3~~	29	Tires Rims
Front245/35 ZR20 91Y	20x9 ET46 ~~5x114.3~~	30	Tires Rims
Rear305/30 ZR20 103Y	20x11 ET58 ~~5x114.3~~	29	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator

Recent articles

Guides worth reading first

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading