2001 Ferrari 550 Maranello tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Ferrari 550 Maranello.

2001 Ferrari 550 Maranello tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1996 – 2002 1 trim

479 hp · 5.5L V12 255/40 ZR18 99Z / 295/35 ZR18 99Z 2 fitments

Generation550 Maranello 1996–2002

Power479 hp

Engine5.5L V12, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front255/40 ZR18 99Z	18x8.5 ET42 ~~5x108~~	29	Tires Rims
Rear295/35 ZR18 99Z	18x10.5 ET30 ~~5x108~~	29	Tires Rims
Front295/35 ZR19 101Y	19x10 ET5 ~~5x108~~	29	Tires Rims
Rear345/30 ZR19 106Y	19x12 ET-6 ~~5x108~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.