2020 Ferrari 812 GTS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Ferrari 812 GTS.

2020 Ferrari 812 GTS tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2019 – 2024 1 trim

789 hp · 6.5L F140GA V12 275/35 ZR20 102Y / 315/35 ZR20 110Y 2 fitments

Generation812 GTS 2019–2024

Power789 hp

Engine6.5L F140GA V12, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front275/35 ZR20 102Y	20x10 ET48 ~~5x114.3~~	–	Tires Rims
Rear315/35 ZR20 110Y	20x11.5 ET57 ~~5x114.3~~	–	Tires Rims
Front255/35 R20 97V	20x10 ET48 ~~5x114.3~~	–	Tires Rims
Rear305/35 R20 104V	20x11.5 ET57 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.