1996 Ferrari F512 M tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Ferrari F512 M.

1996 Ferrari F512 M tire sizes

235/40R18 295/35R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 1996 2 trims

432 hp · 5.0L F12 235/40 ZR18 95Z / 295/35 ZR18 99Z 1 fitment

GenerationF512 M 1994–1996

MarketUSA

Power432 hp

Engine5.0L F12, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/40 ZR18 95Z	18x8.5 ET36 ~~5x108~~	29	Tires Rims
Rear295/35 ZR18 99Z	18x10.5 ET60 ~~5x108~~	29	Tires Rims

434 hp · 5.0L F12 235/40 ZR18 95Z / 295/35 ZR18 99Z 1 fitment

GenerationF512 M 1994–1996

MarketEurope

Power434 hp

Engine5.0L F12, Petrol

Center bore67.1 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/40 ZR18 95Z	18x8.5 ET36 ~~5x108~~	29	Tires Rims
Rear295/35 ZR18 99Z	18x10.5 ET60 ~~5x108~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.