Skip to content

2016 Ferrari FF tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Ferrari FF.

2016 Ferrari FF tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Ferrari FF FF

2011 – 2017 2 trims

FF 6.3

652 hp · 6.3L F140EB V12 245/35 ZR20 95Y / 295/35 ZR20 105Y 2 fitments
GenerationFF 2011–2017
MarketEurope
Power652 hp
Engine6.3L F140EB V12, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 ZR20 95Y20x8.5 ET46 5x114.335TiresRims
Rear295/35 ZR20 105Y20x10.5 ET53 5x114.333TiresRims
Front235/35 ZR20 95Y20x8.5 ET46 5x114.335TiresRims
Rear285/35 ZR20 105Y20x10.5 ET53 5x114.333TiresRims

FF 6.3 (ABA-F151)

652 hp · 6.3L F140EB V12 245/35 ZR20 95Y / 295/35 ZR20 105Y 2 fitments
GenerationFF 2011–2017
MarketJapan
Power652 hp
Engine6.3L F140EB V12, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 ZR20 95Y20x8.5 ET46 5x114.335TiresRims
Rear295/35 ZR20 105Y20x10.5 ET53 5x114.333TiresRims
Front235/35 ZR20 95Y20x8.5 ET46 5x114.335TiresRims
Rear285/35 ZR20 105Y20x10.5 ET53 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.