1975 Fiat 500 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1975 Fiat 500.

1975 Fiat 500 tire sizes

135/80RS12

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1957 – 1975 Europe market 1 trim

17 hp · I2 125x SR12 2 fitments

Generation110 1957–1975

Power17 hp

EngineI2, Petrol

Center boreN/A

PCD4x190

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
125x SR12	12x3.5 ET29 ~~4x190~~	–	Tires Rims
135/80 SR12	12x4 ET29 ~~4x190~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.