2005 Fiat 600 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Fiat 600.

2005 Fiat 600 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2005 – 2010 1 trim

54 hp · 1.1 L Petrol 1.1 L 155/65 R13 / 155/65 R13 6 fitments

Generation187 2005–2010

MarketEurope

Power54 hp

Engine1.1 L Petrol 1.1 L, Petrol

Center bore58.1 mm

PCD4x98

ThreadM12 x 1.25

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front155/65 R13	13x ~~4x98~~	30	Tires Rims
	Rear155/65 R13	~~4x98~~	29	Tires
Alt	Front145/70 R13	13x ~~4x98~~	30	Tires Rims
	Rear145/70 R13	~~4x98~~	29	Tires
Alt	Front155/70 R13	13x ~~4x98~~	30	Tires Rims
	Rear155/70 R13	~~4x98~~	29	Tires
Alt	Front165/55 R13	13x ~~4x98~~	30	Tires Rims
	Rear165/55 R13	~~4x98~~	29	Tires
Alt	165/55 R13	13x5.5 ET25 ~~4x98~~	30 F / 29 R	Tires Rims
Alt	175/50 R14	14x5.5 ET25 ~~4x98~~	30 F / 29 R	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.