Skip to content

2022 Fiat Argo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Fiat Argo.

Bolt pattern
Fitment tables

4 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Fiat Argo I

2017 – 2025 4 trims

Argo 1.0 Flex

76 hp · 1.0L I3 Flex-Fuel 175/65 R14 82T 3 fitments
GenerationI 2017–2025
Power76 hp
Engine1.0L I3 Flex-Fuel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET38 4x9832TiresRims
185/60 R15 88T15x6 ET42 4x9832TiresRims
185/55 R16 85H16x6 ET42 4x9832TiresRims

Argo 1.3 FireFly

97 hp · 1.3L I4 175/65 R14 82T 4 fitments
GenerationI 2017–2025
Power97 hp
Engine1.3L I4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET38 4x9832TiresRims
205/60 R1515x5.5 4x9832TiresRims
185/60 R15 88H15x6 ET42 4x9832TiresRims
195/55 R16 87V16x6 ET42 4x9832TiresRims

Argo 1.3 Flex

105 hp · 1.3L I4 Flex-Fuel 175/65 R14 82T 4 fitments
GenerationI 2017–2025
Power105 hp
Engine1.3L I4 Flex-Fuel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET38 4x9832TiresRims
205/60 R1515x5.5 5.5J 4x9832TiresRims
185/60 R15 88H15x6 ET42 4x9832TiresRims
195/55 R16 87V16x6 ET42 4x9832TiresRims

Argo 1.8

128 hp · 1.8L I4 185/60 R15 88H 3 fitments
GenerationI 2017–2025
Power128 hp
Engine1.8L I4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R15 88H15x6 ET42 4x9832TiresRims
195/55 R16 91V16x6 ET42 4x9832TiresRims
205/50 R17 93W17x6 ET45 4x9832TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.