1984 Fiat Fiorino tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Fiat Fiorino.

1984 Fiat Fiorino tire sizes

165/70R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1977 – 1988 Europe market 3 trims

44 hp · I4 135x R13 2 fitments

Generation127/147 1977–1988

Power44 hp

EngineI4, Petrol

Center bore58.1 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x R13	13x4 ET41 ~~4x98~~	28	Tires Rims
165/70 R13	13x4.5 ET45 ~~4x98~~	29	Tires Rims

50 hp · I4 135x R13 2 fitments

Generation127/147 1977–1988

Power50 hp

EngineI4, Petrol

Center bore58.1 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x R13	13x4 ET41 ~~4x98~~	28	Tires Rims
165/70 R13	13x4.5 ET45 ~~4x98~~	29	Tires Rims

44 hp · I4 135x R13 2 fitments

Generation127/147 1977–1988

Power44 hp

EngineI4, Diesel

Center bore58.1 mm

PCD4x98

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x R13	13x4 ET41 ~~4x98~~	28	Tires Rims
165/70 R13	13x4.5 ET45 ~~4x98~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.