Skip to content

2010 Fiat Fiorino tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Fiat Fiorino.

2010 Fiat Fiorino tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

Fiat Fiorino 225

2006 – 2016 Europe market 4 trims

Fiorino 1.3 MultiJet

94 hp · 199 B1.000 I4 175/70 R14 84T 3 fitments
Generation225 2006–2016
Power94 hp
Engine199 B1.000 I4, Diesel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET44 4x982.1TiresRims
185/65 R15 88T15x6 ET44 4x982.1TiresRims
195/55 R16 87H16x6 ET45 4x982.1TiresRims

Fiorino 1.3 MutiJet

74 hp · 199 A2.000 I4 175/70 R14 84T 3 fitments
Generation225 2006–2016
Power74 hp
Engine199 A2.000 I4, Diesel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET44 4x982.1TiresRims
185/65 R15 88T15x6 ET44 4x982.1TiresRims
195/55 R16 87H16x6 ET45 4x982.1TiresRims

Fiorino 1.4 Fire

72 hp · 350 A1.000 I4 175/70 R14 84T 3 fitments
Generation225 2006–2016
Power72 hp
Engine350 A1.000 I4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET44 4x982.1TiresRims
185/65 R15 88T15x6 ET44 4x982.1TiresRims
195/55 R16 87H16x6.5 ET44 4x982.1TiresRims

Fiorino 1.4 Fire

72 hp · KFT KFV I4 175/70 R14 84T 3 fitments
Generation225 2006–2016
Power72 hp
EngineKFT KFV I4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET44 4x982.1TiresRims
185/65 R15 88T15x6 ET44 4x982.1TiresRims
195/55 R16 87H16x6.5 ET44 4x982.1TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.