Skip to content

2008 Fiat Ritmo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Fiat Ritmo.

2008 Fiat Ritmo tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Fiat Ritmo 198

2008 – 2010 Australia market 2 trims

Ritmo 1.4T-Jet

148 hp · I4 205/55 R16 91V 2 fitments
Generation198 2008–2010
Power148 hp
EngineI4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91V16x7 ET31 4x9833TiresRims
225/45 R17 91V17x7 ET31 4x9833TiresRims

Ritmo 1.9M-Jet

148 hp · I4 205/55 R16 91V 2 fitments
Generation198 2008–2010
Power148 hp
EngineI4, Diesel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91V16x7 ET31 4x9833TiresRims
225/45 R17 91V17x7 ET31 4x9833TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.