2008 Fiat Sedici tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Fiat Sedici.

2008 Fiat Sedici tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2005 – 2009 2 trims

106 hp · 1.6L M16A I4 195/65 R15 91H 3 fitments

Generation189 2005–2009

Power106 hp

Engine1.6L M16A I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91H	15x6 ET50 ~~5x114.3~~	2.3	Tires Rims
205/60 R16 92H	16x6 ET50 ~~5x114.3~~	2.3	Tires Rims
205/50 R17 89H	17x6.5 ET50 ~~5x114.3~~	2.3	Tires Rims

118 hp · 1.9L D19AA I4 205/60 R16 92H 3 fitments

Generation189 2005–2009

Power118 hp

Engine1.9L D19AA I4, Diesel

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 92H	16x6 ET50 ~~5x114.3~~	2.3	Tires Rims
205/50 R17 89H	17x6.5 ET50 ~~5x114.3~~	2.3	Tires Rims
215/50 R17 91V	17x7 ET45 ~~5x114.3~~	2.3	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.