Skip to content

2024 Fiat Ulysse tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Fiat Ulysse.

2024 Fiat Ulysse tire sizes

Bolt pattern

2 generations were sold in 2024. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Fiat Ulysse 507 Facelift

2024 – 2027 1 trim

Ulysse 2.0D (Van)

177 hp · 2.0 L I4 Diesel 2.0 L I4 225/45 ZR17 1 fitment
Generation507 Facelift 2024–2027
MarketEurope
Power177 hp
Engine2.0 L I4 Diesel 2.0 L I4, Diesel
Center bore65.1 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/45 ZR1717x7 ET46 5x10836TiresRims

Fiat Ulysse 507

2022 – 2024 1 trim

Ulysse 2.0D (Van)

177 hp · 2.0 L I4 Diesel 2.0 L I4 225/45 ZR17 1 fitment
Generation507 2022–2024
MarketEurope
Power177 hp
Engine2.0 L I4 Diesel 2.0 L I4, Diesel
Center bore65.1 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/45 ZR1717x7 ET46 5x10836TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.