Skip to content
tirewheelguide.com

1987 Ford Bronco tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Ford Bronco.

1987 Ford Bronco tire sizes

215/75RS15235/75RS15
Bolt pattern
Other years
19831984198519861987198819891990 All 1966–2026
Fitment tables

3 trims sold in 1987

Open a trim for its factory package and every alternative size, front and rear.

Ford Bronco IV

1987 – 1991 3 trims

Bronco 4.9

145 hp · 4.9L I6 235/75 SR15 4 fitments
GenerationIV 1987–1991
Power145 hp
Engine4.9L I6, Petrol
Center bore87.1 mm
PCD5x139.7
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 SR1515x6 ET0 5x139.7–TiresRims
215/75 SR1515x6 ET0 5x139.7–TiresRims
31x10.50 R1515x7 ET10 5x139.7–TiresRims
235/75 SR1515x7 ET10 5x139.7–TiresRims

Bronco 5.0

185 hp · 5.0L V8 235/75 SR15 4 fitments
GenerationIV 1987–1991
Power185 hp
Engine5.0L V8, Petrol
Center bore87.1 mm
PCD5x139.7
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 SR1515x6 ET0 5x139.7–TiresRims
215/75 SR1515x6 ET0 5x139.7–TiresRims
31x10.50 R1515x7 ET10 5x139.7–TiresRims
235/75 SR1515x7 ET10 5x139.7–TiresRims

Bronco 5.8

211 hp · 5.8L V8 235/75 SR15 4 fitments
GenerationIV 1987–1991
Power211 hp
Engine5.8L V8, Petrol
Center bore87.1 mm
PCD5x139.7
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 SR1515x6 ET0 5x139.7–TiresRims
215/75 SR1515x6 ET0 5x139.7–TiresRims
31x10.50 R1515x7 ET10 5x139.7–TiresRims
235/75 SR1515x7 ET10 5x139.7–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading