1996 Ford Bronco tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Ford Bronco.

1996 Ford Bronco tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1992 – 1996 2 trims

198 hp · 5.0L V8 235/75 SR15 3 fitments

GenerationV 1992–1996

Power198 hp

Engine5.0L V8, Petrol

Center bore87.1 mm

PCD5x139.7

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 SR15	15x7 ET10 ~~5x139.7~~	–	Tires Rims
31x10.50 R15	15x7.5 ET10 ~~5x139.7~~	–	Tires Rims
265/75 SR15	15x7.5 ET10 ~~5x139.7~~	–	Tires Rims

205 hp · 5.8L V8 235/75 SR15 3 fitments

GenerationV 1992–1996

Power205 hp

Engine5.8L V8, Petrol

Center bore87.1 mm

PCD5x139.7

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 SR15	15x7 ET10 ~~5x139.7~~	–	Tires Rims
31x10.50 R15	15x7.5 ET10 ~~5x139.7~~	–	Tires Rims
265/75 SR15	15x7.5 ET10 ~~5x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.