2013 Ford Classic tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Ford Classic.

2013 Ford Classic tire sizes

175/65R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2012 – 2015 2 trims

68 hp · I4 175/65 R14 82T 1 fitment

GenerationClassic 2012–2015

Power68 hp

EngineI4, Diesel

Center bore63.4 mm

PCD4x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82T	14x5.5 ET47.5 ~~4x108~~	1.9	Tires Rims

101 hp · I4 175/65 R14 82T 1 fitment

GenerationClassic 2012–2015

Power101 hp

EngineI4, Petrol

Center bore63.4 mm

PCD4x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82T	14x5.5 ET47.5 ~~4x108~~	1.9	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.