1995 Ford Contour tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Ford Contour.

1995 Ford Contour tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1995 – 1997 2 trims

125 hp · I4 185/70 R14 87S 4 fitments

GenerationContour 1995–1997

Power125 hp

EngineI4, Petrol

Center bore63.4 mm

PCD4x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 87S	14x5.5 ET47.5 ~~4x108~~	34	Tires Rims
195/65 R14	14x5.5 ET47.5 ~~4x108~~	34	Tires Rims
205/60 R15 90S	15x6 ET49.5 ~~4x108~~	34	Tires Rims
205/60 R15 90S	15x6.5 ET47.5 ~~4x108~~	34	Tires Rims

170 hp · V6 205/60 R15 90S 4 fitments

GenerationContour 1995–1997

Power170 hp

EngineV6, Petrol

Center bore63.4 mm

PCD4x108

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R15 90S	15x6 ET49.5 ~~4x108~~	34	Tires Rims
185/70 R14 87S	14x5.5 ET47.5 ~~4x108~~	34	Tires Rims
195/65 R14	14x5.5 ET47.5 ~~4x108~~	34	Tires Rims
205/60 R15 90S	15x6.5 ET47.5 ~~4x108~~	34	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.