Skip to content

1999 Ford Crown Victoria tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Ford Crown Victoria.

1999 Ford Crown Victoria tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1999

Open a trim for its factory package and every alternative size, front and rear.

Ford Crown Victoria II (EN114)

1998 – 2011 2 trims

Crown Victoria 4.6i

215 hp · 4.6L V8 225/60 R16 98S 5 fitments
GenerationII (EN114) 1998–2011
Power215 hp
Engine4.6L V8, Petrol
Center bore70.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R16 98S16x7 ET12 5x114.332TiresRims
225/60 R16 98T16x7 ET6 5x114.332TiresRims
235/60 R16 100T16x7 ET6 5x114.332TiresRims
235/55 R17 99T17x7 ET12 5x114.332TiresRims
235/55 R17 99T17x7.5 ET0 5x114.332TiresRims

Crown Victoria 4.6i

200 hp · 4.6L V8 225/60 R16 98S 5 fitments
GenerationII (EN114) 1998–2011
Power200 hp
Engine4.6L V8, Petrol
Center bore70.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R16 98S16x7 ET12 5x114.332TiresRims
225/60 R16 98T16x7 ET6 5x114.332TiresRims
235/60 R16 100T16x7 ET6 5x114.332TiresRims
225/55 R17 97T17x7 ET12 5x114.332TiresRims
235/55 R17 99T17x7 ET12 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.