2018 Ford E-350 Econoline tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Ford E-350 Econoline.

2018 Ford E-350 Econoline tire sizes

225/75R16 245/75R16

Bolt pattern

8x165.1

Other years

2012 2013 2014 2015 2016 2017 2018 2019 All 1992–2019

Fitment tables

4 trims sold in 2018

Open a trim for its factory package and every alternative size, front and rear.

Ford E-350 Econoline IV Facelift

2008 – 2019 4 trims

E-350 Econoline 6.2i

331 hp · V8 Flex-Fuel 225/75 R16 2 fitments

GenerationIV Facelift 2008–2019

Power331 hp

EngineV8 Flex-Fuel

Center bore123.9 mm

PCD8x165.1

Thread9/16" - 18 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 R16	16x7 ET6.35 ~~8x165.1~~	5.5	Tires Rims
245/75 R16	16x7 ET6.35 ~~8x165.1~~	5.5	Tires Rims

E-350 Econoline 6.2i DRW

331 hp · 6.2L V8 Flex-Fuel 225/75 R16 1 fitment

GenerationIV Facelift 2008–2019

Power331 hp

Engine6.2L V8 Flex-Fuel

Center bore123.9 mm

PCD8x165.1

Thread9/16" - 18 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 R16	16x6 ET130.81 ~~8x165.1~~	60	Tires Rims

E-350 Econoline 6.8i

305 hp · V10 225/75 R16 2 fitments

GenerationIV Facelift 2008–2019

Power305 hp

EngineV10, Petrol

Center bore123.9 mm

PCD8x165.1

Thread9/16" - 18 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 R16	16x7 ET6.35 ~~8x165.1~~	5.5	Tires Rims
245/75 R16	16x7 ET6.35 ~~8x165.1~~	5.5	Tires Rims

E-350 Econoline 6.8i DRW

305 hp · V10 225/75 R16 1 fitment

GenerationIV Facelift 2008–2019

Power305 hp

EngineV10, Petrol

Center bore123.9 mm

PCD8x165.1

Thread9/16" - 18 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 R16	16x6 ET130.81 ~~8x165.1~~	60	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.