Skip to content

2008 Ford Edge tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Ford Edge.

Fitment tables

1 trim sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Ford Edge I

2006 – 2010 1 trim

Edge 3.5i

265 hp · 3.5L V6 235/65 R17 103T 8 fitments
GenerationI 2006–2010
Power265 hp
Engine3.5L V6, Petrol
Center bore70.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R17 103T17x7.5 ET40 5x114.335TiresRims
245/60 R18 104T18x7.5 ET44 5x114.335TiresRims
245/50 R20 102T20x7.5 ET44 5x114.335TiresRims
265/40 R22 101V22x9 ET39 5x114.341TiresRims
245/55 R19 102H19x7.5 ET44 5x114.335TiresRims
255/50 R19 102H19x8 ET42 5x114.335TiresRims
255/45 R20 101V20x8.5 ET42 5x114.338TiresRims
265/35 ZR22 99W22x9 ET35 5x114.341TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.