2020 Ford Endura tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Ford Endura.

2020 Ford Endura tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2018 – 2021 Australia market 1 trim

188 hp · 2.0L I4 245/60 R18 105V 5 fitments

GenerationEndura 2018–2021

Power188 hp

Engine2.0L I4, Diesel

Center bore63.4 mm

PCD5x108

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/60 R18 105V	18x8 ET52.5 ~~5x108~~	38	Tires Rims
245/55 R19 103V	19x8 ET52.5 ~~5x108~~	35	Tires Rims
245/50 R20 102V	20x8 ET52.5 ~~5x108~~	35	Tires Rims
245/50 R20 102V	20x8.5 ET52.5 ~~5x108~~	35	Tires Rims
265/40 R21 101V	21x9 ET55 ~~5x108~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.